- [email protected]
- Ostim OSB Mah. Turan Çiğdem Cad. No: 7/1 06374 Yenimahalle / Ankara
INOTEL ELECTRIC
Fault Passage Indicator AGD100
A microprocessor-controlled fault current monitoring device designed for use in medium voltage networks. It offers a user-friendly interface thanks to its touch screen. Data transmission to SCADA centers is carried out via the MODBUS communication protocol. The device is manufactured in compliance with the relevant international standards.
Fault Passage Indicator AGD100
INOTEL ELECTRIC
A microprocessor-controlled fault current monitoring device designed for use in medium voltage networks. It offers a user-friendly interface thanks to its touch screen. Data transmission to SCADA centers is carried out via the MODBUS communication protocol. The device is manufactured in compliance with the relevant international standards.
Supply Voltage: 20–160 VDC
Consumption: <10W
Nominal Voltage: 6–70 kV
Operating Temperature: -25°C...+55°C
Storage Temperature: -30°C...+70°C
Protection Class: IP30 & IK07
Analog Input: 3 ports (3x In)
RS485: 1 port
Digital Input: 2 ports
Digital Output: 2 ports
Alarm Output: 1 port
Height x Width x Depth: 72 x 144 x 108 mm
Weight: 340 g
Assembly: Panel Type
Screen: 2.8" TFT-LCD Touch Panel
Menus: System, Alarm, Setup
Functions: Setting protection and communication parameters; Real-time recording & monitoring alarms
LEDs: Power, communication, error and position information
Phase to Phase Fault Indication: Available
Phase to Earth Fault Indication: Available
Neutral System: Connected over resistor or directly
Phase Fault Current: Functional, 1 A intervals
Phase Detection Time: 50 ms
Earth Fault Current: Functional, 1 A intervals
Earth Detection Time: 50 ms
Auto Reset: Current Restoration
Manual Reset: Via Reset button
Time Reset: 1–6 hours adjustable
Communication: MODBUS via RS485 port
RTC: Available
Event Log: 15 logs
Memory Recording: Available
TS EN 60068-2: Environmental testing standard
TS EN 60529: IP protection standard
TS EN 62262: IK impact protection standard
TS EN 60255: Protection relay standard
TS EN 61000: EMC standard
Solar PV Plants: Renewable energy facilities
Industrial Facilities: Factories and production plants
Wind Turbines: Wind energy applications
Electricity Distribution Grid: Medium voltage distribution networks